Euromix™ Venetian Effects
Euromix™ Venetian Effects is a premium, water-based, fine build acrylic polymer decorative finish. It is designed to create sophisticated Venetian-inspired, polished and multi-tonal surface effects. The product can be tinted to a wide range of colours, allowing applicators to create individual decorative finishes ranging from subtle tonal movement through to more pronounced, contemporary feature finishes.
Product Summary
Euromix™ Venetian Effects is a flexible, smooth decorative finishing compound developed for creating unique Venetian-inspired and polished architectural finishes over suitably prepared building substrates. Its fine-grained formulation and excellent workability allow the applicator to build depth, movement and tonal variation through multiple thin applications and specialised trowel techniques.
Euromix™ Venetian Effects can be tinted to a wide range of colours, providing flexibility in achieving both traditional and contemporary decorative finishes.
Euromix™ Venetian Effects is suitable for both interior & exterior applications when applied as part of an appropriate Euromix coating system.
Product Name
Euromix™ Venetian Effects
Code
VENEFCTS
Packaging
5 litre & 15 litre plastic buckets.
Appearance
A smooth, fine-grained, wet acrylic plaster. Colour and finished appearance will vary depending on the selected tint, application technique, number of coates and final polishing method.
Application
Apply an initial build-up coat of Euromix™ Venetian Effects using a clean stainless-steel trowel over the entire prepared surface. Once fully dry, lightly sand where required to remove imperfections and prominent trowel marks. Apply subsequent coats in thin, tight layers using discontinuous and overlapping trowel strokes to progressively create the desired pattern, depth and tonal movement.
The final coat may be worked and polished by repeatedly passing a clean stainless-steel trowel over the surface with controlled pressure until the desired decorative appearance and highlights are achieved.
The finished appearance will vary depending on colour selection, application technique, trowel movement, pressure and number of coats.
A suitable Euromix-approved protective sealer should be applied where required to protect the completed decorative finish, particularly for exterior applications or areas subject to moisture and regular contact.
Coverage
For topping applications, allow approximately 0.5kg /SQM. Average coverage per 15L bucket is approximately 30-45 SQM, depending on substrate condition, application thickness, number of coats and the decorative effect being created.
Drying and Curing
Avoid applying Euromix™ Venetian Effects in windy conditions or where temperatures are outside the range 10°C to 30°C. Do not apply if rain or frost is imminent before the product has properly dried. Where exposure to rain or moisture is likely, protect the coating for at least 24 hours.
Drying and curing times are affected by substrate type, porosity, temperature, humidity and ventilation and should therefore be treated as a guide only (at approximately 25°C & 50% RH):
Touch Dry
1 to 2 hours.
Recoat
Approximately 2 hours.
Curing time
Approximately 4 to 5 days, depending on conditions.
Recommended Products
A suitable Euromix-approved protective sealer should be applied where required to protect the completed decorative finish, particularly for exterior applications or areas subject to moisture and regular contact.
