The Ultimate Base with
Euromix™ NPS Keycoat Base Render
Euromix™ NPS Base Render is a dry mix, full polymer, cement based render formulated for application over non porous sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix™ NPS Base Render is mixed with water only (no added Bond).
Formulated with an strong adhesive bond, NPS Keycoat Base render can be used as on difficult substrate surfaces such as smooth masonry, off form work concrete and cement sheet.
When used as a base coat, Euromix™ NPS Base Render can be applied up to 3-5 mm thick in one coat. Higher thicknesses can be achieved by applying multiple coats.
Euromix™ NPS Base Keycoat Render is a full polymer render that can be applied by hand or machine, as a medium build base coat over non porous substrates, like PVC, EPS and FC (fibre cement).
Makes this product particularly suited for use as a base render for low porosity substrates and provides excellent strength when used in conjunction with mesh (such as when coating over EPS). It is also suitable for more porous substrates, like AAC and FC (Fibre-Cement Boards) etc.
No need for scratch coat and can achieve higher build than other rendering approaches requiring mesh.
Developed and Made in Australia, an easy solution for the renderer - no gauging, no additives required. Simply add water, and render!
Euromix™ FP Render
Euromix™ FP Render is a dry mix, full polymer, cement-based render formulated for application over sheet and panel substrates such as autoclaved aerated concrete (AAC), expanded polystyrene (EPS), fibre cement (FC) and plaster-based materials.
Euromix™ FP Render is mixed with water only (no added Bond). When used as a base coat, Euromix™ FP Render can be applied up to 3-4 mm thick in one coat (over masonry and similar solid substrates).
©2021 Euromix. All rights reserved | Terms of Service | Privacy Policy