Euromix™ Fine Coat Texture
Euromix™ Fine Coat is a premixed, polymer-based texture coating, designed for decorative finishing over Euromix™ Renders and other substrates.
Product Summary
Euromix™ Fine Coat is a premium quality, high build acrylic texture coat, manufactured with special graded sand, fillers, and other chemicals.
The typical grain size (the aggregate used to achieve the textured finish) for Fine Coat is @ 0.5mm diameter.
Fine Coat is applied by trowel over suitably primed substrates to provide a decorative, protective coating with a stylish 'traditional fine cut sandstone' appearance.
White in colour at the time of manufacture, Euromix™ Fine Coat can be tinted to achieve a desired colour.
Product Name
Euromix™ Fine Coat Texture
Code
TEXTFC
Packaging
15 & 5 litre plastic buckets.
Appearance
In the bucket the material appears as a wet, off-white, thick paint material containing sand.
Application
Thorough stir the Fine Coat in the bucket, using a power stirrer, prior to application.
The Fine Coat is towelled on to the substrate, to a thickness determined by the coarsest particles in the material and then finished with a plastic finishing trowel applied in a circular motion, to achieve an even textured appearance.
It is imperative that a 'wet-edge' is maintained at all time and that the material is not over worked as this will likely result in patchiness and joint lines showing in the coating. Ensure that there are sufficient trowel hands available on large areas.
Do not apply Euromix™ Texture in windy conditions or in temperatures outside the range 10°C to 26°C or where the substrate is wet.
Keep newly coated areas protected from rain and moisture for at least twelve (12) hours, longer in the lower temperature range. Do not apply if rain or frost is imminent or possible before the product has properly dried.
Shield the coating and the substrate from moisture for at least 24 hours.
Drying and Curing
Drying and curing of the product is affected by type, dryness and porosity of the surface, temperature, humidity, ventilation, climate conditions and application technique and therefore drying and curing can only be given as a guide (at 25°C & 50% RH):
Touch Dry
Two (2) to four (4) hours.
Recoat
Twenty-four (24) to forty-eight (48) hours
Related Products
Fine Coat Texture cannot be applied directly over PVC, polystyrene (EPS), AAC or other absorbent materials without the application of a suitable base coat first.
Euromix™ recommends the use of Euromix™ Acrylic Primer as the priming coat with Euromix™ Fine Coat.
©2021 Euromix. All rights reserved | Terms of Service | Privacy Policy