Euromix™ Matt is a high solid, acrylic based water repellant
and decorative matt paint coating that provides excellent flexibility, elasticity and durablility on surfaces subjected to high winds, salt spray and severe weather conditions.
Product Summary
Euromix™ Matt is most often used as the final coloured topcoat matt finish over render and texture coated surfaces. It provides an effective waterproofing barrier that also breathes - allowing vapor to escape from the substrate. Matt is suitable for coating most prepared building substrates including; off-form concrete, cement render, fibre cement sheeting and Brick/block work.
Product Name
Euromix™ Matt
Packaging
15 litre plastic buckets.
Appearance
In the bucket the material appears as a wet, off-white, thick liquid.
Application
It is recommended that the Euromix™ Matt be thoroughly stirred in a bucket using a power stirrer, prior to application.
The Euromix™ Matt can be applied by brush, roller or spray in a minimum of two coats (if applying by roller, it is recommended that a 13mm nap on smooth surfaces and 20mm on coarse surfaces).
Allow a minimum of twenty-four (24) hours drying between coats.
Do not apply Euromix™ paints and Textures in windy conditions or in temperatures outside the range 10°C to 30°C. Keep newly coated areas protected from rain, frost, dew and severe weather conditions until fully dried or for at least 48hours.
Drying and Curing
Drying and curing of the product is affected by type, dryness and porosity of the surface, temperature, humidity, ventilation, climate conditions and application technique and therefore drying and curing can only be given as a guide (at 25C & 50% RH):
Touch Dry
Twenty to forty minutes (20-40 min).
Recoat
Twenty four (24) hours.
Euromix™ Primers and Paints not only provide the colour for your wall or ceiling finish, they also improve the functionality of the finish system.
Euromix™ Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high quality sponge finish is required. It can be applied by hand or by machine, in layers ranging from 4mm to 8mm at a time.
Euromix FP Render is a dry mix, full polymer, cement based render formulated for application over sheet and panel substrates, like, autoclaved aerated concrete (AAC),expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix FP Render is mixed with water only (no added Bond).When used as a base coat, Euromix FP Render can be applied up to 3-4 mm thick in one coat (over masonry and similar solid substrates).
Euromix™ Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high quality sponge finish is required. It can be applied by hand or by machine, in layers ranging from 4mm to 8mm at a time.
Euromix™ NPS Base Render is a dry mix, full polymer, cement based render formulated for application over non porous sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix™ NPS Base Render is mixed with water only (no added Bond).
Euromix™ LWHB Render is a lightweight dry mix, full polymer, cement based render formulated for use where a high build finish is required. Euromix™ LWHB can be applied over most masonry and sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS) and fibre cement (FC). Euromix™ LWHB Render is mixed with water only (no added Bond required).