Euromix
AAC Acrylic Finishing System
Euromix™ offers numerous products for use in finishing systems over autoclaved aerated concrete (AAC) hebel panels and blocks.
System Scope
The Euromix™ AAC finishing system summarised here covers;
Cementing of joints.
Fixing of PVC trims & angles and fibreglass mesh.
Application of a base coat of render to a nominal thickness of 4-6mm, with some make-good of variations in level / alignment of substrate, as allowed by the thickness of render being applied.
Application of a finish coat of render to a nominal thickness of 2-3mm - finished ready for a textured decorative finish (1-1.5mm thickness).
Such a finish will hide most surface imperfections, reduce the impact of minor structural imperfections and misalignment of walls (depending on their severity). This is the minimum finish recommended by Euromix™ for AAC wall panel systems.
Euromix™ Renders are designed for use as decorative finishes. They are not to be used in ‘engineered’ applications (where special strength, movement, hardness or other performance characteristics are required).
AAC HEBEL ADHESIVE
Euromix™ AAC/Hebel Adhesive is preferred in installation of hebel & aac blocks prior to application of Euromix™ Render System for extreme and tough bonding.
HEBEL 1ST RENDER COAT
Apply Euromix™ Full Polymer (FP) Render throughout entire of wall to 6-8mm in thickness and ready to straight edge to straighten walls as much as possible (allow minimum 24 hours to dry)
TOP RENDER COAT
One first coat of Euromix™ Full Polymer (FP) Render is dry, apply a secondary coat of Euromix™ Full Polymer Render to 2-3mm, and finish it to a float finish, ready for Euromix™ Texture Coating. In cases where Sponge Finish is required, refer to Step 5.
©2021 Euromix. All rights reserved | Terms of Service | Privacy Policy
Euromix Paints & Primers
Euromix Texture Coatings
Euromix Patching Compounds
Euromix Additives and Adhesives
White Set Plasters