Euromix™

WALSC Nasahi AAC Render Finishing System

Euromix™ offers numerous products for use in finishing systems over WALSC Nasahi autoclaved aerated concrete (AAC) panels and blocks.

DOWNLOAD SYSTEM INFO

System Scope

The Euromix™ WALSC AAC Wall finishing system summarised here covers;

Cementing of joints.

Fixing of PVC trims & angles and fibreglass mesh.

Application of a base coat of render to a nominal thickness of 4-6mm, with some make-good of variations in level / alignment of substrate, as allowed by the thickness of render being applied.

Application of a finish coat of render, to a nominal thickness of 2-3mm, finished ready for a textured decorative finish (1-1.5mm thickness) or paint.

Such a finish will hide most surface imperfections and reduce the impact of minor structural imperfections and misalignment of walls, depending on their severity. This is the minimum finish recommended by Euromix™ for Foamed WALSC Wall System.

Euromix™ Renders are designed for use as decorative finishes, they are not to be used in ‘engineered’ applications (where special strength, movement, hardness or other performance characteristics are required).

1

WALSC AAC HEBEL ADHESIVE

Euromix™ AAC Adhesive

Euromix™ AAC/Hebel Adhesive is preferred in installation of hebel & aac blocks prior to application of Euromix™ Render System for extreme and tough bonding.

2

WALSC 1ST RENDER COAT

Euromix™ FP Render

Apply Euromix™ Full Polymer (FP) Render throughout entire of wall to 6-8mm in thickness and ready to straight edge to straighten walls as much as possible (allow 24 hours to dry)

3

TOP RENDER COAT

Euromix™ FP Render

One first coat of Euromix™ Full Polymer (FP) Render is dry, apply a secondary coat of Euromix™ Full Polymer Render to 2-3mm, and finish it to a float finish, ready for Euromix™ Texture Coating. In cases where Sponge Finish is required, refer to Step 5

5

SKIM COAT

(OPTIONAL)

Euromix™ Skim Coat

If Sponge Finish is specified, please use Euromix™ Skim Coat - finish to float and sponge finish.

6

TEXTURE

COATING

Euromix™ Texture

It is always highly recommended in AAC & Hebel to use a Texture Coating to provide flexibility and enhance aesthetics. Can be tinted to colour of choice. Euromix™ offer 4 grades (Fine, Medium, Coarse and Extra Coarse) Texture Coatings for commercial and residential projects.

Euromix™ System Guide

Substrate Systems Guide for Polystyrene (EPS), Fibre Cement Sheeting Board, Masonry, Brickwork, Aerated Autoclave Concrete (AAC), PVC Walling System, AFS Ritek Walling Systems etc

DOWNLOAD OUR

PRODUCT DATA

SHEETS

DOWNLOAD OUR

SAFETY DATA

SHEETS

DOWNLOAD OUR

EUROMIX SYSTEM

GUIDES