Euromix

FC Formwork Walling System

Euromix™ polymer modified cement renders and full polymer textures are formulated to provide weather resistant, decorative finishes over fibre cement (FC) covered permanent formwork walling systems.

DOWNLOAD SYSTEM INFO

Finishing System Summary

There several rendering systems recommended by Euromix for finishing over fibre cement (FC) lined permanent formwork systems, like Ritek® (registered to James Hardie) and AFS Logicwall® (registered to CSR).

These render, texture and paint finishing systems have been designed, and; should be applied in such a way as; to;

Minimise the appearance of minor structural imperfections, misalignment of walls, etc.

Provide a render/texture finish that is sufficiently thick/strong to be resistant to impact forces.

The key components of such systems are summarised as;

Substrate preparation setting of sheet joins.

Fixing of PVC trims.

Base render coat.

Finishing render coat.

Texture coat.

Paint coat - optional.

1

Euromix Patch Course + PVC Beads

Evenly fill the joints using Euromix Patch Coarse, mixed with @ 10% cement and then embed 55mm wide alkali resistant fibreglass (FG) mesh tape (non-adhesive) into the Patch. Where specified, PVC Moulds/trims should be installed using Patch Coarse, ensuring that they are plumb and aligned with the appropriate sheet surface.

2

BEDDING RENDER COAT

Euromix FP Render

Once the Patch Coarse has dried (at least 24 hours in normal conditions) prepare the selected Euromix Full Polymer Render product and apply it a nominal thickness of 3-5mm, using a trowel and straight edge to achieve true and level finish.

3

TOP RENDER COAT

Euromix FP Render

Use of Euromix Full Polymer (FP) Render as second coat. This is always recommended prior to application of Texture Finish. Skim can also be used as a finish coat when a sponge finish is required instead of texture coat.

4

PRIMER

COATING

Euromix Acrylic Primer

Application of Euromix Primer prior to Texture Coating is recommended for all substrates to assist in bond and ensure tinted texture colour is finished.

5

TEXTURE COATING OR PAINT

Euromix Texture / Euromix Paint Flex

It is recommended to use a Texture Coating to enhance aesthetics for finishing and provide flexibility to the system. Can be tinted to colour of choice.

contact@euromix.com.au

02 9572 9061

31-33 Water Street Strathfield South NSW 2136

RESOURCES