Euromix™ Shield
Euromix™ Shield is a premium, water-based penetrating siloxane sealer designed to provide long-term water repellency and protection to suitably prepared porous and absorbent mineral surfaces.
Product Summary
Euromix™ Shield is a premium quality, clear penetrting sealer designed to provide effective water repellency while maintaining the natural appearance and texture of the treated surface. The penetrating siloxane technology absorbs into porous substrates to help reduce moisture ingress, surface soiling and staining. Once cured, Euromix™ Shield provides a visible water-beading effect while allowing the substrate to remain vapour permeable. Euromix™ Shield is suitable for both internal and external applications
Product Name
Euromix™ Shield
Packaging
5 litre Jerry Can and 20 litre cube.
Appearance
In the bucket the material appears as a clear liquid. When finished, it appears as a clear natural finish.
Application
It is recommended that Euromix™ Shield be thoroughly stirred prior to application. Apply Euromix™ Shield evenly using a clean roller, brush or suitable low-pressure spray equipment.
Apply evenly to achieve uniform surface saturation while maintaining a wet edge. Allow the product to penetrate into the substrate and avoid excessive product build-up, pooling or ponding. Appy a second coat where required to porous or highly absorbent substrates. Application should continue until the substrate achieves adequate saturation or refusal.
Do not apply Euromix™ Shield to wet or saturated surfaces, during rain or where rain is imminent.
Drying and curing of the product is affected by type, dryness and porosity of the surface, temperature, humidity, ventilation, climate conditions and application technique and therefore dyring and curing can only be given as a guie at at 25°C & 50% RH.
Touch dry time is approximately 1.5 hours at at 25°C & 50% RH and dry time for recoating is approximately 4 hours at at 25°C & 50% RH. Allow additional drying time during cool, humid or poorly ventilated conditions.
Euromix™ Shield should be applied by tradespeople with the appropriate skills and experience int he application of penetrating sealers and protective coatings.
Euromix™ Shield is a penetrating protective treatment and is not designed to form a waterproof membrane.
Drying and Curing
Drying and curing of the product is affected by type, dryness and porosity of the surface, temperature, humidity, ventilation, climate conditions and application technique and therefore drying and curing can only be given as a guide (at 25°C & 50% RH):
Touch Dry
Approx. 1.5 hours at 25°C & 50% RH
Recoat
Approx. 4 hours at 25°C & 50% RH
Related Products
Euromix™ Primers and Paints not only provide the colour for your wall or ceiling finish, they also improve the functionality of the finish system.
Euromix Render
Euromix™ Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high quality sponge finish is required. It can be applied by hand or by machine, in layers ranging from 4mm to 8mm at a time.
Euromix Full Polymer
Euromix FP Render is a dry mix, full polymer, cement based render formulated for application over sheet and panel substrates, like, autoclaved aerated concrete (AAC),expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix FP Render is mixed with water only (no added Bond).When used as a base coat, Euromix FP Render can be applied up to 3-4 mm thick in one coat (over masonry and similar solid substrates).
Euromix Cream
Euromix™ Cream Render is a multipurpose render, suitable for use both as a base coat where finishing renders, texture coats, etc. or architectural finishes (like tiles) are to be applied and as a finish coat, where a high quality sponge finish is required. It can be applied by hand or by machine, in layers ranging from 4mm to 8mm at a time.
Euromix NPS Keycoat
Euromix™ NPS Base Render is a dry mix, full polymer, cement based render formulated for application over non porous sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix™ NPS Base Render is mixed with water only (no added Bond).
Euromix LWHB High Build
Euromix™ LWHB Render is a lightweight dry mix, full polymer, cement based render formulated for use where a high build finish is required. Euromix™ LWHB can be applied over most masonry and sheet and panel substrates, like, autoclaved aerated concrete (AAC), expanded polystyrene (EPS) and fibre cement (FC). Euromix™ LWHB Render is mixed with water only (no added Bond required).
