Euromix™ 1Texture Coating
Euromix™ 1Texture is a premium, pre-mixed acrylic texture coating designed to provide a durable, flexible and weather resistant decorative finish over suitably prepared over Euromix™ Render systems and other approved substrates.
This texture coating incorporates Hydroshield™ water-repellent technology to provide enhanced protection against exposure to weather and moisture.
Product Summary
Euromix™ 1Texture is a premium quality acrylic texture coating manufactured using selected graded mineral sands, advanced additives, flexible polymers and enhanced weather-protected technology. The combination of carefully selected raw materials provides excellent adhesion, long-term durability, workability and a consistent textured appearance.
Euromix™ 1Texture is designed to create a consistent and natural textured appearance. This texture coating provides excellent workability and application performance for both residential and commercial applications.
Manufactured with a vivid-white base and can be tinted to a wide range of contemporary colours through authorised Euromix™ distributors.
Euromix™ 1Texture combines premium acrylic polymer technology with carfully selected mineral aggregates and additives to provide a durable and consistent decorative texture finish.
Product Name
Euromix™ 1Texture
Packaging
15 litre plastic buckets.
Appearance
In the bucket the material appears as a wet, vivid-white, thick acrylic coating.
Application
Thoroughly mix Euromix™ 1Texture using a mechanical power stirrer prior to application.
Apply Euromix™ 1Texture evenly over the prepared and primed substrate using a clean stainless-steel trowel. Apply the material to a consistent thickness appropriate to the selected texture profile and finish using a suitable plastic finishing trowel.
During application, maintain a continuous 'wet edge' and avoid overworking the material as this may result in visible joint lines, patchiness or inconsistencies in the finished texture. Ensure sufficient applicators are available when coating large or continuous wall areas to maintain a consistent 'wet-edge'.
Do not apply Euromix™ 1Texture at temperatures below 10°C or above 30°C, during periods of rain or frost, in strong winds or where the substrate is excessively hot or wet.
Freshly coated surfaces must be protected from moisture and adverse weather conditions for a minimum of twenty-four (24) hours and longer during cool or humid conditions.
Coverage
Average approximate spread rate for Euromix™ 1Texture is 10 to 12 SQM per 15 litre bucket. Actual coverage will vary depending upon type, condition and porosity of the substrate, surface preparation, selected texture profile, application thickness and application technique.
Drying and Curing
Drying and curing of the product is affected by type, dryness and porosity of the substrate, application thickness, temperature, humidity, ventilation, climate conditions and application technique. Drying and curing times should therefore be treated as a guide only.
Touch Dry
Two (2) to four (4) hours.
Recoat
Twenty-four (24) to forty-eight (48) hours
Recommended Products
Euromix™ 1Texture cannot be applied directly over PVC, polystyrene (EPS), AAC or other absorbent materials without the application of a suitable base coat first.
For optimum performance, apply Euromix™ Acrylic Primer or Euromix™ Sand-Tex Primer prior to Euromix™ 1Texture
