Euromix™ offers numerous products for use in finishing systems over autoclaved aerated concrete (AAC) panels and blocks.

Euromix™ offers numerous products for use in finishing systems over autoclaved aerated concrete (AAC) panels and blocks.

Why use Euromix Acrylic Render? Euromix™ Acrylic Render vs Cement RenderRendering is a construction technique involving the application of Render to normally an exterior wall, planter boxes, property fence line, or exterior of a property. There are many different types of rendering systems available, one of which are acrylic renders. An acrylic render is any… Continue reading Acrylic Render vs Cement Render

FP Render - AS1530.1 Non Combustible CertifiedEuromix FP Render is a dry mix, full polymer, acrylic cement based render formulated for application over sheet and panel substrates, like, autoclaved aerated concrete (AAC Hebel),expanded polystyrene (EPS), fibre cement (FC) and plaster based materials. Euromix FP Render is mixed with water only (no added Bond). When used… Continue reading AS1530.1 Non Combustible Euromix FP Render

164 Harbord Road Brookvale NSW 2100

26 Atkinson Road Taren Point NSW 2229

The Euromix PVC Finishing System requires the application of six (6) different acrylic based Euromix products; Euromix™ NPS Primer, Euromix™ Patch Coarse, Euromix™ NPS Base Render, Euromix™ Sand Finish & Euromix™ Euroflex.

203 Woodville Road Villawood NSW 2163

11-13 Crystal Street Petersham NSW 2049

8 Whyalla Street Fyshwick ACT 2609

35-43 Essington Street Mitchell ACT 2911

Euralbi Fino has been designed for use as a fine finish, white set top coat. Fino works best as the finishing coat applied over a Euralbi Plus base coat.

Euralbi Plus has been designed for use as a ‘stand alone’ white set or as the base coat in a two component system where Euralbi Fino top coat is used to provide a finer set finish.

90-114 Princes Highway St Peters NSW 2044

31-33 Water Street Strathfield South NSW 2136

Euromix 1Render is a versatile pre-blended, acrylic render designed for efficiency on your job. In most cases you can finish with just 1 coat. Ideal for either a Float or Sponge finish, ready for texture or paint.

Euromix™ AAC Adhesive is specially formulated for bonding aerated autoclaved concrete (AAC) lightweight panels and blocks.

Euromix™ Acrylic Primer is a water-based acrylic primer. Can be applied over all Euromix™ render and patch products and most building substrates, including off-form concrete, cement-based renders, fibre cement sheeting, polystyrene, PVC and brick and blockwork.

Euromix Cream Render, Skim Coat and Render are compliant for non combustible building materials, and is fully compliant with AS1530.1

Euromix™ Bond is an acrylic polymer bonding agent formulated to enhance the adhesion strength, moisture resistance and setting characteristics of Euromix® Render.